Inventables X-Carve Feeds & Speeds
Pre-configured calculator for the Inventables X-Carve. Your machine's specs are already loaded. Just pick your bit and material.
Machine Specs
Compare with others →- Work Area
- 29.5" x 29.5" x 4.5" (1000mm version), smaller 750mm also available
- Drive System
- Belt drive
- Spindle
- DeWalt 611 spindle and mount included
- Max RPM
- 16,000-27,000 (DeWalt 611)
- Motion
- V-wheels on aluminum rails
- Collet
- DeWalt 611 collets (1/4" and 1/8")
Ready to calculate?
Open the calculator with your Inventables X-Carve specs pre-loaded. Save it to your profile and you'll never enter machine specs again.
Open Calculator for Inventables X-CarveAbout the Inventables X-Carve
- • Wide gantry with thick walls for consistent carving
- • Locking hardware, molded belt clips, permanent pulleys
- • Can cut aluminum, wood, MDF, PCBs, foam, cork, acrylic
- • 4.5" z-axis depth for effective 2.5D carving
- • Laser engraving upgrade kit available
- • Comprehensive waste board, carving bit super pack included
💡 Quick tip for Inventables X-Carve owners
Start with conservative feeds and speeds, especially on a new machine. Run a few test cuts in scrap material before committing to a real project. Our calculator gives you safe starting points. You can always push faster once you know your machine's limits.
Learn More
Feeds & Speeds for Beginners The complete guide: what chipload means, how to read the tables, and when to break the rules. Best CNC Bits for Beginners Which bits to start with, when to upgrade, and how to avoid breaking expensive tooling. Upcut vs Downcut Bits When to use each type, and why it matters more than most beginners think.